Aerosol Paint Chrome

Single-component solvent paint, ready to use.
Applies imperatively on a black, hard and shiny surface (without sanding) in 4 to 5 thin and successive sails.
IMPORTANT : the brightness of the surface depends on the final brightness of the chromium effect obtained.
Drying at 20 ° C: excluding dust 1 min - dry to the touch 1 min
It is not recommended to varnish because the varnish reduces the shine of the chrome effect.
For parts that must imperatively be varnished (parts subject to intempreries and / or abrasion), the varnish must be applied only after 2 weeks minimum.
Covering power: an aerosol can cover +/- 1 m²

TECHNICAL SHEET AEROSOL CHROME EFFECT
Product nature: single-component solvent paint, ready to use
Use / destination: System to be revarnished or finished for Car, motorcycle, decoration, other
HUES: Silver with mirror effect
Theoretical covering power: +/- 1 m² / aerosol - Packaging: Aerosol 400 ml
VOC: < 420 G/L - Transport code: CLASS 3, GROUP 3.3, UN CODE: 1950, IMDG CODE: 3372
MELANGE: Shake well before use for at least 30 seconds.
APPLICATION; Imperatively on a black and hard background, unsheabbed, not degreased, in 4 to 5 fine and successive sails, until sufficient coverage.
DRYING AT 20 ° C: DRY EXCLUDING DUST: 1 MIN - DRY TO THE TOUCH: 1 MN
VARNISHING: recommended after a drying of at least 7 days, with any type of varnish. Application of 4 extra-thin sails spaced one minute apart, then normal varnishing.
The varnish protects effectively but reduces the mirror effect.
STORAGE: between 10°C and 30°C


ATTENTION: this product packaged in aerosol can not be shipped either by TNT, or to destinations that can be served by air (DOM-TOM in particular)